PACIFIC-EDDHA Fe® is
manufactured and designed :
- For use as an effective solution to correcting iron deficiencies and for the maintenance of iron levels in crops grown in highly acidic or alkaline soils. It is particularly effective in highly alkaline soil conditions.
- For use in all crops that respond to supplemental applications of iron
- For good compatibility with all agricultural inputs such as fertilizers and pesticides
- For formulating with NPK blended fertilizers targeted at applications in highly alkaline soils or where soils are known to have deficiencies in iron.
SPECIFICATION :
Chemical Name: Ethylenediamine-N, N’-Bis (2-Hydroxyphenylacetic Acid), Ferric Sodium Complex
CAS No: 16455-61-1
Molecular Formular: C18H16N2O6FeNa
Molecular Weight : 435.2
Appearance : Dark red-brown microgrannular
Ortho-ortho content : 60%
Iron Chelated : 6%
Molecular Structure :
DIRECTION FOR USE – GENERAL
-
PACIFIC-EDDHA Fe® works best when crops are not under moisture stress and are supplied with adequate major nutrients.
-
PACIFIC-EDDHA Fe® is most effective when applied at crop stages where demand for iron is most critical and when the crop is most responsive to iron applications.
-
If this product is to
be applied as a liquid either on the soil or on
the foliage, it is NOT necessary to pre-mix with a small amount of water. Instead, add this product directly into the solution tank slowly and maintain good agitation. Agitation and stirring should continue until the product is fully dissolved.
-
As a matter of precaution, for tank-mix applications with other agricultural inputs such as fertilizers and pesticides, it is advisable to prepare a sample mixture of these products to ensure good compatibility before application.
DIRECTION FOR USE - AS A SOIL APPLICATION
1. PACIFIC-EEDHA Fe® can be applied around the plants as a powder, liquid spray, liquid injection or through drip irrigation systems
-
When applied
as a powder, it should be washed in or irrigated
with water within 4 hours of application.
-
When applied
as a spray onto the soil, make sure that coarse
spray nozzles are used and that adequate volume of
water is used to wet the soil thoroughly.
-
When
applied as a soil injection, it should be done at
less than 1 meter apart.
2.
General Rates of Application
The rates recommended below represent the upper
and lower limits of the range. Actual rate to be
applied depends on size of the plant and the level
of need as determined by the level of
deficiency of iron.
|
|
|
|
|
|
Citrus, Avocados, Mangoes |
Young tree 500g—700g per 100m2
Mature tree 200g—500g per tree
Annual maintenance 100g—150g per tree
|
|
|
3.7g—7.5g per meter of row in a band or as a side dressing
|
Tomatoes, Cotton, Legumes, other vegetables and root crops |
1kg—2kg per hectare as maintenance or 2kg—5kg per hectare if chlorotic. Apply prior to planting or when deficiency symptoms appear. |
|
|
|
|
|
|
3. Applications on tree crops
This product is to be applied in a wide
circular band under the full canopy of the tree,regardless of the method of application.
4. CONDITIONS OF SALE
-
Seller warrants that this product consists of the ingredients specified and is reasonably suitable for the purpose stated on this brochure when used in accordance with the directions under normal conditions of use.
-
The information contained in this brochure is believed to be accurate and is intended solely for general guidance in the use of this product;it should not be construed as a guarantee of suitability for a particular application.
Other Products in
Crop Nutrition
Contact Us
For
Agricultural Chemical Specialties, contact
David at david@pacificagriscience.com
For
Generics Pesticides & Fertilizers, contact
Candy at
candy@pacificagriscience.com
|
